Product Performance
1. The product is easily hydrolyzed in water, forming a multi-nuclear complex to make the colloidal particles and suspended particles in the water aggregate together to grow up, forming a floc with large volume, high density and fast settling.
2. In water treatment, the PH of raw water has a wide range of application (PH7-9).
3. No corrosive effect on pipeline equipment; no harm to human body.
4. The chromaticity removal rate of the sewage is high, and the chromaticity of the wastewater after the dosing treatment can reach the national discharge standard. The final water can be reused for recycling in the factory.
5. The flocculation produced by the product has a high density, is easy to dewater, and has less sludge.
Application
- Water
Decoloring Agent is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
- Water Decoloring Agent can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
- Water Decoloring Agent also can be used in the production process of paper&pulp as retention agent.
Water Decoloring Agent should be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water; The pH value of the waste water should be adjusted to 7-10 for better result. When the colority and COD are relatively high, Water Decoloring Agent can be used with the help of poly aluminum chloride, but not mixed together. In this way, the treatment cost can be lowered.
Application method and notes:
1. When the colority and CODcr are relatively high, it can be used with the help of
Polyaluminum Chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
2. The pH value of the waste water should be adjusted to 7~8 for better result.
3. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
Package and storage:
Packed in plastic drums with each containing 30kg, 50kg, 250kg , 1000kg, 1250kg IBC tank or others according to your requirements.
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use.
Certifications
FAQ
Lanyao Water Treatment Co.,Ltd.
Contact Now